Windows 7 disables programs. How to disable autorun programs? Autorun settings

How to disable autoload - a lot of users ask this question, including those who have "seven" on their PC. Often it occurs due to reduced computer performance. This happens for one reason - a large number installed programs Windows, which are included immediately after the start of the entire system. As a result, the computer starts to slow down, and the launch of Windows can take several minutes or even more. To avoid this problem, you need to understand how to disable autorun programs in Windows 7.

Such situations arise not only among ordinary users, but also experienced ones. For greater performance, in order to limit the consumption of resources and speed up the work of the hardware, you need to turn off Not desired programs in the startup menu. The bottom line is that almost all programs are standardly included after switching on. You can usually find a special "window" where the user has a request for this, but it is so small or in a distant corner that most people simply do not notice it. Setting up autoruns or autoloading programs is a matter of minutes, but most people just don't know how to do it.

When disabling programs, you need to be very careful and do not try to turn off everything in a row. Some utilities are directly related to the work of Windows 7, you can cause irreparable damage to the system and make it worse.

Method one: remove programs from the startup folder

How to remove a program from a car Windows startup 7. This is the simplest and most common way, which is familiar to almost every user. To do this, you need to go to the menu " Start", then to all programs and click on the" folder.

It is this folder that is the starting point for enabling programs on your computer. Everything that is located in it starts when the system is turned on. How to limit their auto-inclusion. The simplest and crudest method is to simply remove all the utilities that are located in the "" folder. Almost every user has done this at least once in their life. But the problem is that I want to limit their launch, but not completely delete them. But you will no longer be tormented by the autorun of Skype or other similar programs.

Method Two: Using the Standard MSConfig Utility

This method is for those who need installed utilities, and he can't just take them and delete them. But shutdown still remains in your tasks, in which case you need to use standard program. It is standardly built into Windows 7 and is on every computer without exception, you do not need to install or download anything from the Internet.

To run the utility, you need to open the menu " Start"And click on the search bar, enter the following name into it.

Sometimes a search may show that it is not on your PC. Then we look for it at the address in the screenshot and double-click to launch it. Next, a window opens, all the settings of which are in upper corner. We need to click on the "" tab and uncheck all unnecessary programs. Thus, they will no longer automatically start when you turn on your computer and bring you inconvenience.

If you do not know what this or that utility is responsible for, it is better not to change anything, turn off only those with which you are personally familiar. Click OK after excluding all unnecessary programs from the list. You will be prompted to restart your computer. It's up to you, the process will not affect our settings in any way. The main advantage of this utility is its simplicity, and the disadvantage is the small functionality. It does not provide the ability to disable all existing programs. And this is a problem for some users, so it is worth considering other options.

Method Three: Manually Disabling Programs

To perform this process, we need to open the Registry Editor. To do this, press the key combination Win + R or separately go to the menu " Start". There you need to type the word " regedit».

A registry editor will appear in front of us, it looks scary, but in fact nothing like that. Of course, it is better not to change anything in it so that no changes occur in the system. But, if you know what you are doing, then you should not be afraid. In our case, we need to find the following address " Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run».

Folder " Run' is what we are striving for. If you run it, it will unfold in front of us a large number of new folders. Here is a list of all files that run when the system is turned on. Choose any of them, click right click mice and delete. It's simple enough, but also not effective method, which can bring some complications or future failures in the work of Windows 7. Nevertheless, everyone can carry out such a procedure, it is its ease that makes this option one of the best.

Fourth Method: Disabling the Program Using Downloaded Utilities

This is the most popular method. You just need to install a program that can help you disable any software on your PC. The advantage is that for this you just need to go to the desired tab and uncheck the boxes, that's all. But first you need to choose exactly the program that can perform its functions 100%. In modern conditions, this is a difficult task, because there are thousands of such utilities on the Internet, most of them of low quality.

Experts suggest using the program autoruns, its main advantage is that it is completely free. At the same time, the utility is very powerful, has great functionality. With it, you can disable absolutely any program in just a few clicks. This will allow advanced users to turn off all the Windows software that they simply do not need.

Before using any programs that work with the registry, even the most tested and recommended, always.

We download the program from the official site, the only negative is English language, although you can find a Russified version. Control Panel autoruns very simple, so everyone can understand it. Unzip the archive and click on autoruns.exe. The program does not require installation and will start immediately.

Also of interest is double-clicking on the entry line with the mouse pointer. This will open the corresponding system program(utility) Windows responsible for running the corresponding entry file. For example, by clicking on the line SunJavaUpdateSched, you will see the following window that opens again:

To disable autoplay specific program, you just need to uncheck the box next to it.

As you can see autoruns very easy to use and also does not require installation. It remains only to disable the really unnecessary software. And don't forget to make restore points before you make major changes.

So, we hope that you have received a comprehensive answer to the question of how to disable autorun programs in Windows 7, and now you can significantly speed up your PC.

Program settings

When you want to deactivate the autorun of a particular application, the first thing to look at is its settings. Many programs provide an option to disable autoload.

Let's consider shutdown with specific examples:
In the uTorrent torrent client: Menu → Settings → Program settings → General → “Run ... with Windows” option (you need to remove the “bird” in the window)

To remove the Skype messenger from startup, in its menu, open:
section "Tools" → Settings → General settings→ the function "Run ... at Windows startup" (uncheck the box in the line with a mouse click).

Regular option

In the "System Configuration" system panel, Windows provides the user with the ability to independently disable autorun programs. This procedure is performed in just a few mouse clicks:

1. Click the "Start" button on the taskbar.

2. In the search menu bar, type -msconfig. Press "Enter".

3. In the System Configuration window, click the Startup tab.

4. In the list, remove the "birds" next to utilities, programs, game applications, the launch of which you want to deactivate.

5. Press the "Apply" and "Ok" buttons in succession.

Registry editing

Intervention in the system registry in order to remove programs from startup is required when, for some reason, the msconfig option and third-party tools cannot be used. Editing requires the user to have certain skills and experience in the registry editor. For with incorrect actions during the execution of the procedure, you can disable the system.

To remove autoload keys, do the following:
1. Press together on Win keyboard+R.

2. In the line "Open" type the directive - regedit. Click "OK".

3. If you want to disable automatic software launch for all accounts, open "branch":
HKEY_LOCAL_MACHINE → SOFTWARE → Microsoft → Windows → CurrentVersion → Run

To configure autoload in the current account:
HKEY_CURRENT_USER → Software → Microsoft → Windows → CurrentVersion → Run

4. In the second panel of the editor (Name/Type/Value), right-click on the key of the desired application and select "Delete" from the menu. After activating the command, it will be removed from the startup list.

Folder "Startup"

1. Open the Start menu. Scroll down the list a little.

2. Locate the "Startup" folder. Right click on it and select "Open".

3. In the window that appears, remove the shortcuts of unnecessary programs: using context menu(“Delete” option) or drag and drop to the “Trash” method.

Special programs

You can also remove a program from startup with special maintenance utilities. There are certain advantages to this approach: no need to learn OS settings, fast access, convenient alternative interface, etc.

Here are two popular special utilities that allow you to remove a program from startup.

CCleaner is a cleaner program. Its main functional task is to clean up file directories and the registry from software garbage. But among its additional options is the Windows autorun configuration. Free version CCleaner distribution can be downloaded from ccleaner.com.

After launching and installing the program, follow the steps described below:

1. Click the icon of the "Service" section. In the submenu (adjacent column), click "Startup".

2. Select in the list by clicking the application that you want to remove from automatic launch.

3. Press one of the buttons:

"Turn off" - temporary deactivation;
"Delete" - complete removal from the list.

Autoruns is an advanced tool for managing modules, services, processes and system startup. Developed by Sysinternals and acquired Windows developers(Microsoft Corporation). Fixes all running program objects in the system. Recommended for use experienced users.

To set up autorun with Autoruns:
1. Go to official page for download - https://technet.microsoft.com/ru-ru/sysinternals/bb963902.aspx

3. Extract the archive:

right-click on the volume of the Autoruns archive;
option in the "Extract to Current Folder" menu.

4. After unzipping is complete, run the autoruns.exe file.

5. In the utility window, go to the "Everything" tab.

6. In the "... CurrentVersion \ Run" registry keys, uncheck the boxes next to the programs that you want to remove from startup.

7. Upon completion of the procedure, close the utility, restart the computer and check the changed autorun setting.

Viruses in startup

Many viruses (browser hijackers, miners, adware, etc.) "prescribe" in the system bootloader. And in some cases, their automatic start cannot be disabled either by regular system tools or by third-party utilities. After being turned off by the user at startup, they still turn on again.

That's why in case of a virus infection, it is necessary to use anti-virus tools to debug autoload.

The most effective in solving such problems:

Tiny but extremely useful virus scanner. It is able to destroy pests not only in the autorun list, but also in browsers, programs, and the system registry.

It is distributed free of charge on the website https://ru.c/adwcleaner/.

After launching and completing the AdwCleaner update, click "Scan" in its panel. Then delete the found virus objects and restart Windows.

Rescues with a strong virus infection of the PC. Able to find malware that remains invisible to the main antivirus running in the system. Successfully detects many types of digital infections (worms, Trojans, rootkits).

To download the scanner, use the button " Free download» at https://www.malwarebytes.com/. Scanning is started in the Scan menu: Scan mode selection → Settings (if necessary) → Start.

Regularly check your system startup settings. Especially after installing a new software, games. Disable automatic launch of rarely used, unnecessary programs. Otherwise, they will consume computer resources without any benefit. And on low-power systems can cause crashes, slowdowns Windows work.

Successful PC setup and comfortable use of the operating system!

To begin with, let's still figure out what auto start is, or as they are also called, autoload programs. This is a process that allows applications to load on their own after turning on and starting Windows. There are situations when you accidentally or out of necessity downloaded some program and you periodically need it, but there is no need for it to be launched every time after the start operating system, and turning it off all the time is tedious. Also, an important advantage of disabling the program from autorun will be that they will not eat up your RAM while in constant action. In this article, we will look at how to exclude programs from autoload / autostart in Windows 7, Windows 8 and using additional universal utilities.

Disabling AutoPlay in Windows 7

You may already be familiar with this method, if you have been using a computer for a long time, you could accidentally discover it yourself without any additional information, but for beginners, the information may still be new.

Go to the Start menu > All Programs and find the Startup folder.

Everything that is there is launched when the computer is turned on. And so that these programs do not start, it is enough just to remove them from there.

We use the standard windows 7 utility - MSConfig

This utility, MSConfig, is already on your computer by default and you do not need to install it, just run and use it.

And it's very easy to run it:

Open the start menu again and type msconfig in the search bar.

It will be found immediately, you just have to click on its shortcut to launch it.

If for some reason you don’t have a search bar in the Start menu, then you can simply press the Win + R keyboard shortcuts and the following window will open:

Enter msconfig there and click OK.

As a result, we should run the msconfig utility. It looks like this:

Go directly to the "Startup" tab. Unchecking the boxes will disable unnecessary programs. But if you do not understand what each of them is responsible for, then it is better not to disable it.

After you click OK, you will be prompted to restart your computer, but you don't have to.

This utility is very convenient, but it is also not functional enough, because. is not able to provide us with the ability to disable absolutely all (any) programs from autorun.

Therefore, we will consider a few more ways.

Removing from the windows 7 registry manually

We start the registry editor. To do this, we press the usual keyboard shortcut "Win + R" or again in the search bar in the "Start" menu, we already type the words "regedit".

A very scary incomprehensible window is launched with many folders that look more like abracadabra than names.

But we are not afraid, but calmly understand everything and gain knowledge!

Among these folders, in the distant wilds, there are two sections of the autorun "seven":

general (local registry), which is used for all users, the address is:
Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run

personal registry - for the current user, at the following address:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

That is you need to get into the Run folder, expanding the folder tree one by one.

They contain files that run with Windows and you can easily delete them as usual - by right-clicking and selecting "delete".

You can first go to the first address, clean it up, and then take on the second one.

Disabling autorun programs using third-party software

Now we will talk about the third-party program Autoruns, which is distributed completely free of charge (freeware), but at the same time very powerful and functional - in just a couple of clicks it can disable absolutely everything that can automatically start when you turn on the computer.

At the office site - the English version, but we can easily figure it out, even without knowledge of this foreign language.

The downloaded archive has the .zip extension and can be unpacked by any archiver.

There are 4 files in the folder. We are interested in "autoruns.exe", which we run.

At the first start, we will be asked to accept the license agreement, which we will do by clicking on the “Agree” button.

The program looks like this:

We immediately open the “Everything” tab, which is a list of absolutely all startup objects.

But in order not to get lost there, there are tabs in which all this is broken down separately: Winlog, Drivers, Explorer, etc.

If you uncheck the box, we will disable autorun. If you click on a line, you can see a description of the object below: the version of the program, the path of its location on the computer, size, etc.

In the “Logon” tab, there is a list of programs that we could disable using the previous methods described in the article.

You may notice that some lines are highlighted in pink - these are just objects that do not have detailed description, and those whose files are deleted and can no longer be loaded, but are simply listed in the list, are marked in yellow. Those. they may or may not be removed.

Again, be careful when disabling something you don't know anything about. Perhaps this is necessary for the main operation of Windows 7 and after disabling these services, the computer will not work as it should.

For the laziest we provide video tutorial of the whole process:

Disabling AutoPlay in Windows 8

To disable auto-launch of applications in Windows 8, you need to perform slightly different operations. We call "Task Manager". This is done with the key combination Ctrl + Alt + Delete, or right-click on the taskbar and select the appropriate line in the menu that appears.

IN Windows system 8, unlike before Windows versions 7 now has a new column that will show you how much the program affects the performance of your computer.

Click on a row in the Startup Impact column to sort applications by load per system so you can more easily analyze and turn off unnecessary more resource-intensive programs. After sorting the application, left-click on them and in the same window on the "Disable" button.

Just like in the case of Windows 7, after disabling unnecessary programs, you will need to restart Windows.

Disabling autorun using special programs.

IN this case we will use CCleaner. It is multifunctional and has proven itself well for a long time! With it, you can not only set up startup on your computer, but also improve the performance of your PC, clean up the OS registry, increase hard drive space, and many other nice little things.

After downloading the CCleaner program, launch it from the shortcut on the desktop and select the "Tools" menu from the left menu of the program, and then go to the "Startup" section.

Programs will be displayed as tabs, to disable them, just click on them and click on the "Turn off" button in the right menu of the program. Also, after all the procedures for cleaning up startup, it will be desirable to reboot the system.

Experienced users are familiar with the situation when, after new installation windows computer just flies, but over time, its performance decreases and oddities appear in its behavior. Automatically launched programs play an important role in this. A clean system has practically no utilities and other software that starts at startup, but it accumulates. And as a result, the computer slows down, and the user spends his nerves. Proper setting of automatic start solves this situation.

How to disable autoloading of the program and reduce the number of icons near the clock

Why you need to remove programs from autorun

When installing new software, the user, without hesitation, clicks on the "Next" button, without even reading what will happen to his computer. But software developers embed various “chips” into it that start at system startup.

Let's consider in what situations it is necessary to clean autoload:

The computer started to boot slowly.
Decreased performance.
The appearance of unnecessary reminders and pop-ups when turned on.
Work failures.

Important! Setting up autorun is the first step on the list of those that help solve performance problems.

Removing unnecessary programs from startup does not positively affect other applications, as they are given more PC resources. The automatic launch setting is especially relevant for owners of low-power laptops, netbooks and outdated PCs, where there is no surplus random access memory or processor power.

Important! Even software invisible to the user running on a PC consumes resources.

Why are programs automatically launched?

the need to inform the user;
setting up automatic updates;
accelerated start of software at startup;
quick access to program functions;
brand promotion and advertising.

There are a number useful programs, which automatic download needed:

firewall;
antivirus;
device emulation software;
drivers.

There is no need to remove useful software from autorun. This will result in loss of stability or performance problems.

Removing programs from startup

There are two ways to configure autorun: OS tools and third-party utilities. The use of utilities is rarely required, and they themselves also load the system. By programs when you turn on the computer, it is better to use the built-in tools in Windows.

Windows offers several ways to set up autostart programs:

msconfig utility;
registry editor;
Task Manager (Windows 8 and above only).

Important! You can disable programs at computer startup using the registry editor, but this should only be done by experienced professionals. Intervention in its work can lead to loss of OS performance.

Disabling Autoload with Msconfig in Windows 7

One way to view startup and disable unnecessary stuff in Windows 7 is the MSConfig utility. It allows you to manage OS startup options.

Important! Be careful when using the utility and remember the last steps so as not to disrupt the computer.

Let's consider how autorun programs are configured when the computer is turned on:

Launch the Run command by pressing Win + R on your keyboard.
Enter msconfig in the only field of the window that opens and confirm the action by pressing Enter.

msconfig is a Windows operating system configuration utility

Go to startup by selecting the appropriate tab

Autoload data

Disable unnecessary programs by unchecking the boxes next to them.

Advice. It is worth disabling the torrent when you turn on the computer, being in the MSConfig autorun control tab. When you click on the link, it will start on its own, and the speed of starting the OS will increase.

One more tab of this utility deserves attention - "Services". It allows you to turn off unnecessary services. You should not disable Microsoft services or antivirus software, but you should disable third-party update services. You can completely remove Skype from autorun only if you disable it on both tabs. The situation with other programs is similar.

Advice. Be careful when editing the list of services launched automatically. Disabling the necessary ones will affect the operation of the OS.

Services that start automatically

After confirming the changes with the Ok button, the utility will ask you to restart the computer. If accidentally disabled desired applications, then they return to autoload by performing the actions in reverse order.

Changing AutoPlay with Windows 8 Task Manager

In Windows 8, Microsoft has changed the layout of many items. It became possible to enter autoload through the "Task Manager".

Consider how to find downloads on a computer with Windows 8:

We enter the "Task Manager".
Click on the desired program and click "Disable".
Programs that are included in startup

Viewing downloads on a computer through the "Task Manager" is more convenient and accessible to inexperienced users.

Enabling automatic start back occurs here. For inactive applications, the "Disable" button will change to "Enable".

What programs can be removed

Software developers include in the download modules that are not needed by most users, it is not required to run all update check services, and all unused applications must be turned off.

Worth knowing. Programs will continue to be updated even if the corresponding modules are disabled, only the check will occur when the application is launched.

Consider what can be safely turned off:

Unused modules to installed programs.
Skype and other messengers. They should be launched as needed.
Update tools.

WATCH VIDEO

No need to turn off antiviruses and security tools. This will jeopardize security and disrupt system performance. Now you know how to stop programs from starting automatically when you turn on your computer.

- This is the automatic loading of programs after the operating system starts. As a rule, with the help of startup, those programs are launched that should run constantly while the computer is turned on. But, many software developers abuse the ability to autoload their programs. As a result, programs appear in startup that should not be there. Over time, the number of programs that automatically load increases and the computer starts to work much slower, spending most of the performance on useless work. From this material you will learn how to remove the program from startup in Windows 7 and solve this problem.

Using settings to remove a program from startup in Windows 7

There are several ways to remove programs from startup in Windows 7. The easiest way is to open the program settings and disable the autoload feature. In most cases, this will be enough to ensure that the program is no longer loaded with the start of the operating system.

For example, in order to remove from startup you need to open the menu "Settings - Program Settings".

And, after the program settings window opens, go to the "General" tab and uncheck the "Run uTorrent with Windows" function.

Everything, after that it remains to save the settings by clicking on the "OK" button. These simple actions will be enough for Windows 7 or any other version of Windows. The next time you restart your computer, uTorrent will no longer automatically download.

How to remove a program from startup in Windows 7 using MSCONFIG

The Windows operating system has a great utility called System Configuration. It allows you to manage startup, services, and other operating system settings. In order to open this utility, you need to execute the "MSCONFIG" command. This can be done through the Run menu or through the search bar in the Start menu or the tile start screen if you're using Windows 8.

So hit the combination Windows keys+ R. After that, the Run menu should appear in front of you. In this menu, you need to enter the command "" and press the enter key.

After that, the System Configuration utility will open in front of you. Here you need to immediately go to the "Startup" tab.

On this tab, you can To do this, just uncheck the box next to the corresponding program. After you have unchecked, do not forget to save the settings by clicking on the "Ok" button.

Also, using the System Configuration utility, you can disable not desired services. After all, services can also be used to autoload programs. Click the Services tab and check the box next to Hide Microsoft Services.

After that, you can examine the list of programs that are loaded as services and, if necessary, disable some of them. This is done in the same way as on the "Startup" tab: uncheck and save the settings.

Using Autoruns to Remove Startup Programs in Windows 7

Also, in order to remove unnecessary programs from startup in Windows 7, you can use third party programs designed specifically to solve such problems. One of the most advanced programs of this kind is .

Using the Autoruns program is quite simple. All you need to do is uncheck the box next to the program you would like to remove from startup.

Most of the programs that are in startup are available on the "Logon" tab. And services can be disabled on the "Services" tab. After unchecking, the settings are applied immediately. So saving something is not necessary.