Windows 10 defender removal program. It occurs in two cases

The built-in utility - Windows Defender protects the PC from viruses and malware that can be "picked up" on the Internet when downloading files or connecting other users' flash cards to the device. If you are completely satisfied with the performance of your antivirus program, then you need to know how to disable Windows Defender 10 permanently. This is written in this article.

Using the Settings app

To disable Windows 10 Defender:

Good to know! The built-in protection will be disabled for a while (approximately 15 minutes). After that, the system will automatically launch Windows Defender.

In the Local Group Policy Editor

After that, any attempt to launch the built-in defender will result in an error.

Good to know! If you set the parameter to the "Not configured" position, it will start functioning in the normal mode.

In the Registry Editor

Important! If you don't find this setting in the registry branch, create it yourself: RMB on the “Windows Defender” folder → create → DWORD value (32 bits) → enter the name “DisableAntiSpyware” → set its value to “1”.

If you decide to run the defender again, set the value to "0" in the parameter.

Video

The video shows in detail how to completely disable Windows Defender using the Group Policy Registry and the Registry Editor.

How to disable Windows 10 defender through third-party programs

In addition to standard tools, you can disable the built-in defender with special free programs.

The program was originally developed to disable the update function that is performed in automatic mode. But she "can" much more: enables and disables the OS defender, and has a Russified interface.

The Destroy Windows 10 Spying utility disables surveillance in the OS. But when using the advanced setup mode, the item is available in it. shutdown Windows Defender.

How to enable Windows 10 defender

To activate the defender in Windows 10, you do not need to perform any actions - click on the message that is located in the notification center and the system will do everything automatically.

If de Windows activation Defender was run through the Registry Editor or the Local Group Policy Editor, then repeat the same steps as when disabling, just start the internal defender.

Making exceptions

If you do not need the built-in antivirus (how to choose the best antivirus, find out in the article "") to check a specific folder, program or drive, add them to the Windows Defender exclusion list.

Start Menu → Settings app → Update & Security.
Go to "Windows Defender" → in the right part of the window in the "Exclusions" section, click "Add exclusion" → specify necessary files, folders or applications.

Conclusion

Windows Defender protects your computer from viruses and malware. If necessary, it can be disabled or enabled, as well as configured by adding the necessary files, folders and programs to the list of exceptions.

Windows Defender- this is the so-called Windows 10 defender. However, we do not dare to call it such. The fact is that it blocks only a small fraction of all the threats that await us on the network. Even most absolutely free antiviruses cope with their duties ten times better. But that's half the trouble. Often, Defender blocks not only malware, but also the data, files, and applications we need. That is why we want to tell you how to disable Windows 10 defender permanently.

Installing a Third Party Antivirus

Most The best way protect your computer from viruses - install good antivirus. In addition, it will automatically replace standard remedy protection.

It can be literally any antivirus: free, trial, store bought. The main thing is that it be, otherwise you risk the safety of all your data: passwords, photos, videos and other content.

So, let's imagine that you have already installed a third-party antivirus program. Now we offer you to figure out if the defender has been disabled. To do this, follow these steps:

From now on, the anti-virus protection settings for your computer are managed by the anti-virus program. In our case, this is Kaspersky Anti-Virus.

The settings menu is launched from the main program window by clicking on the gear located in the lower left corner. Accordingly, in another program, the settings may start differently.

Deactivating the defender through the Registry Editor

If for one reason or another you do not want to install a third-party antivirus, then there is another way to disable the Windows 10 defender forever - for this you should use the Registry Editor built into the system. So, let's look at the shutdown process in great detail:

If you want to check whether everything really worked out, use the instructions above - it is also relevant in this case.

As you can see, there is nothing complicated - a few simple steps save you from problems with the built-in anti-virus software.

The release of Windows 8 brought a built-in antivirus protector to the operating system, which also migrated to version 10 of Windows.

It works by default until you decide to install some other antivirus software like Kasperskiy or NOD 32.

They will automatically disable the functionality of the built-in software that works with Windows.

Many are interested in the question of how to disable windows 10 defender manually.

You can do this in three ways:

for a short period;
through the registry (permanently).
through the editor local policy(forever).

Why is this needed? The fact is that some games, programs and applications that you plan to install on your computer may not be perceived by the system in a very friendly way.

The defender sees one of installation files potentially dangerous and blocks it.

As a result, the installation breaks and you have to look for a way out of the situation. Turning on the software is not so difficult, but more on that later.

Turn off the defender

Local Group Policy

To get started, press the combination Win + R and write the command gpedit.msc.

We are looking for the cherished here Windows folder Defender (in the release, i.e. the final version of the OS, it can be renamed Defender).

Double-click on the highlighted item shown in the screenshot.

For this parameter, you need to switch the radiobutton (checkbox) to the "Enabled" position, if you still intend to disable the defender.

After that, you can exit the settings and make sure that your actions are correct by viewing this notification.

Edits in the system registry

How to disable windows 10 defender through the registry? To do this, go to the editor of the registry itself. Press the key combination Win + R and enter the command regedit.

There will be a folder with an active defender here, which you need to get rid of by making it inactive.

We create a DWORD value called DisableAntiSpyware, but only if the component was previously missing from the section.

Advice! If you want to disable the defender, set the value to "0". To reactivate the software, use "1".

Now, if the antivirus program will bother you, it will only be rare notifications that it is inoperative and is not able to protect the system from malware.

Reactivate Windows Defender

So, you set out to turn on your defender or don’t know what to do when you see such an inscription.

It occurs in two cases:

The defender does not work because a third-party antivirus is installed on the PC. In such cases, no action should be taken - the Windows firmware was disabled automatically after the installation of security software.
You yourself managed to deactivate the program, or there was some kind of failure in the system that needs to be fixed.

In Windows 10, you simply need to click on the message that appears in the notification area. Then the system will bring everything to the proper state.

If you "played" with the settings of the local group policy or the registry, you will have to restore everything yourself, since the system will not be able to start Windows Defender on its own.

Need to go back to system settings and activate the previously dormant service.

Advice! You shouldn't uninstall the built-in Windows Defender just because you feel like it. Firstly, it is an antivirus, albeit imperfect. It prevents various malware from penetrating the system, which is found in abundance on the Internet. It is worth deactivating it only when it is really necessary and you control the entire process.

To be sure of own security, we advise you to pre-purchase or download a third-party antivirus software designed specifically to provide maximum protection devices in real time.

Which antivirus to choose is up to you, but leaving the machine without proper protection is strongly discouraged.

How to turn off Windows 10 defender

Easy ways to disable Windows 10 defender completely.

Last Windows version 10 comes with Windows Defender, which is designed to protect your computer from viruses, malware and other threats. While it may not offer all the features available in other antivirus programs, it is suitable for many home users.

Most antivirus packages automatically disable Defender during installation. You can remove this feature using one of the free antivirus 2020 from our review.

IN previous versions operating system to enable or disable this feature was not difficult. IN Windows settings Defender there was an option to turn it off or on. tenth Microsoft versions moved the settings to "Options".

Go to Start.
Go to Settings app
Select "Update & Security"
Open Windows Security.

Select "Open Defender Security Center".
Click the Virus & Threat Protection tab.
Then "Settings for protection against viruses and other threats."

Toggle the "Real-time Protection" and "Cloud Protection" switch to the "off" position.
The protector will turn off for approximately 15 minutes.
After this time, Windows Defender will start automatically.

Full disable using group policy

If the operating system detects that real-time protection is disabled, protection will be enabled automatically after a while. To disable Windows Defender permanently, we need to manually disable the Defender service and stop it from starting automatically. you also can disable SmartScreen Filter.

The Group Policy Editor is part of Windows 10 Pro and Enterprise. To disable Defender, follow these steps:

After making changes, Windows Defender is immediately disabled.

Disabling using the Windows registry

You can also disable Windows Defender in the registry. This is essentially the same setting that is written to it when you disable an application in the Group Policy Editor.

open "Start"> "Run";
type regedit.exe and press enter;
Navigate to the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender;
if you see a DisableAntiSpyware preference on the right, double click on it and set it to 1 to disable Windows Defender;

if the preference does not exist, click right click Click Windows Defender and select New > Double (32-bit) Value and name it DisableAntiSpyware.

Finally, you will need to disable the antivirus program service. In the Registry Editor, navigate to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinDefend

Double-click the Start parameter in the right pane and set its value to 4.

How to turn off Windows 10 Defender

Hello friends! You all know that when you install a third-party antivirus on a Windows 10 computer, the built-in windows antivirus Defender turns off, but this does not always happen and some antivirus programs do not stop Windows Defender (for example, free and 360 Total Security). In this case, you can use two antiviruses at the same time (which is not good for system performance) or disable the built-in one. If you want to completely disable Windows Defender 10, then there are several simple ways. Let's consider them, and at the end we'll talk about the incomplete, temporary shutdown of the Defender, i.e. disable its real-time protection feature.

1. How to disable Windows 10 Defender using the system registry

Click the "Start" menu, select "Run". We type in the input field regedit

We go to the registry section:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender

Right-click on the Windows Defender partition and select "Create" -> "P DWORD value (32 bits)».

After creating the parameter, give it a name DisableAntiSpyware and set the value to 1.

If later you want to enable the built-in antivirus, then set this parameter to 0.

2. How to disable Windows 10 Defender using local group policy

Friends, if you have Windows 10 Pro edition and above, you can disable Windows 10 Defender using local settings. group policies. Read the detailed manual in the article.

3. How to disable Windows 10 Defender using Win Updates Disabler

There is a good free software-tweaker Win Updates Disabler, you can download it via a direct link from the official website of the developer

http://www.site2unblock.com/download/win-updates-disabler-setup.exe

Portable version

http://www.site2unblock.com/download/win-updates-disabler-portable.zip

Download, install and run the program. In the main window, check the item "Disable Windows Defender" (as you can see, with the help of this program we can even disable automatic update OS) and click " Apply Now» .

The computer restarts. After a reboot, the built-in antivirus stops working.