The Bluetooth speaker does not reproduce sound from the laptop. Bluetooth wireless speakers: how to connect them? Bluetooth needs to be turned on and made discoverable

Bluetooth speaker is a very popular device. like this portable acoustics Can be connected to almost any mobile device. They are mainly connected to phones or tablets. Since the sound produced by even an inexpensive portable speaker will be much better and louder compared to the built-in speakers in the phone. Everything is clear with mobile devices, but what about laptops and computers. Is it possible to connect a Bluetooth speaker to a laptop or PC? After all, the sound through the laptop's built-in speakers is not much better, if not worse, than on mobile devices Oh.

Yes, most laptops have problems with sound quality. Even on expensive models. Either the sound is very quiet, or there is not enough bass, or something creaks, whistles, etc. Therefore, if you have a portable speaker (or not very portable, but with Bluetooth connectivity), then you can easily connect it to your laptop and enjoy pleasant and loud sound.

The Bluetooth speaker can even be connected to a PC. As a rule, speakers are connected to a desktop computer via cable. But if you have a good one wireless speakers, then why not connect them via Bluetooth. True, there is one nuance there. On Bluetooth laptops there is a built-in one, but on desktop computers (V system units) a built-in Bluetooth module is rare. Therefore, in most cases, to connect a wireless speaker to a PC we will need a USB Bluetooth adapter. I wrote in the article how to choose it. After purchase you need.

If you have a laptop, especially on Windows 10, then Bluetooth should work without any special settings, installing drivers, etc. as a last resort you need to download the Bluetooth driver from the laptop manufacturer’s website and install it. The connection process itself is slightly different in Windows 10 and Windows 7. As in Windows 8. The easiest way, of course, is to connect a Bluetooth speaker in Windows 10. There, this process was made simple and clear. Let's also look at the connection process using Windows 7 as an example. Sometimes, after connecting, you also need to configure the audio output to the wireless speaker.

As for the wireless speaker itself, you can connect absolutely any one to your computer: JBL, Beats, Logitech, Sven, Rapoo, Xiaomi Mi bluetooth speaker, Aspiring and others.

Connecting a wireless Bluetooth speaker in Windows 10

Open the Start menu and go to Settings. Next, go to the “Devices” section.

Click on "Add Bluetooth or other device".

Next you need to turn on the speaker and put it into connection mode. Very important point! The Bluetooth indicator on the speaker needs to be actively blinking. Only then can other devices detect it and connect. As usual, to do this you need to click (most often press and hold) button with the Bluetooth icon, or the power button.

After that, select “Bluetooth” on the computer. The search for available devices will begin. Our column should appear in the list. I have a Sony SRS-XB30. Click on it.

A window should appear saying that our wireless speaker system has been successfully connected.

Just click on the "Done" button. My sound immediately began to play through a speaker connected via Bluetooth. Turn off the speaker - the sound is played through the speakers of the laptop or PC (through speakers connected via cable).

If you have problems with audio output, try manually selecting the audio output device (our wireless speaker) in settings. Like this:

And after a recent update, Windows 10 now has the ability to output sound (and use a microphone) to different output sources for different programs. You can configure this function in the “Device and application volume settings” section, which can be accessed from the window shown in the screenshot above. There you just need to select the audio output source for a specific application. For example: we output sound from the player to a wireless speaker, and system sounds to the built-in speakers.

Connecting a wireless speaker to a computer is no different from.

Connecting Bluetooth speakers to a laptop on Windows 7

First, turn on your speaker and put it in connection mode. By pressing the "Bluetooth" button or the power button. Typically, you need to press and hold for a few seconds. The Bluetooth indicator should be actively blinking.

There should be a Bluetooth icon in the tray. Click on it right click mouse and select "Add Device".

A new window should appear showing the devices available for connection. Our wireless speaker should be there. You need to select it and click “Next”.

Next, you will configure the device, after which a window should appear with a message that the device has been successfully connected and is ready for use. And if the sound after connection is not played through the wireless speaker, then you need to right-click on the sound icon in the tray, select “Playback devices”, then right-click on the connected Bluetooth speaker and select “Use as default”. After which everything should work.

Wireless speaker doesn't work...

In Windows 7 I was unable to connect a Bluetooth speaker. The system finds it, identifies it as a speaker, connects it, but it doesn’t work. No driver. If you open connected devices, it will appear with a yellow exclamation mark. There will be an unknown, Bluetooth peripheral device in Device Manager. And during the connection process, you may notice a message that “The software for the device has not been installed.”

I looked on the Sony website (I have a portable speaker from this manufacturer) I couldn't find any drivers in the "Downloads" section. If in the manager you click on " Peripheral device Bluetooth" and select "Update drivers", the system immediately displays that nothing was found.

I did not download drivers from any third-party sites, or use programs for automatic installation drivers. I hope you will not encounter such a problem, and your column will become friends with Windows 7. And if you know how to solve this problem, I will be grateful if you write about it in the comments. In general, switch to Windows 10. It is better, and there are no such problems.

How to connect a wireless speaker to a computer via cable?

Yes, a portable speaker can be connected not only via Bluetooth. It can also be connected via a cable to the same computer or laptop. I’m not sure that all speakers have an audio input (AUDIO IN), but mine, and I think most other models have it too. To connect you will need a 3.5 mm jack – 3.5 mm jack cable. Perhaps your speaker system has a 2.5 mm audio input. Need to watch. The cable is usually included in the kit, but not always (I didn’t).

We connect one end of the cable to the speaker.

And the second end needs to be connected to the audio output on a laptop or computer.

The sound will be played through the connected portable sound system until you turn it off. Or until you change the default device in the playback settings in Windows.

That's all. If you have any questions, suggestions, comments, or additions to the article, write in the comments.

Often, the standard built-in speakers on a laptop are not enough to reproduce high-quality sound. Therefore, many users connect portable devices to it. Bluetooth speakers, which have a number of advantages. They are compact and do not require wires or cables to operate. In addition, the sound of Bluetooth speakers is an order of magnitude higher than standard ones.

The main thing is to figure out how to connect them to the laptop. We will talk about this in the article.

There should be no difficulties connecting portable Bluetooth speakers to a laptop. Especially if you follow a certain procedure:

On Windows 10, just right-click on the Bluetooth enable icon. The “Go to Settings” option will open. Click on it and wait for the list of devices to appear, which will include speakers. If automatic connection does not occur, then select the required device and click “Connect”.
On Windows 7 and 8 it should appear in the “Devices and Printers” section (Control Panel\All Control Panel Items). Find it, click on it and click connect. You can also open the Bluetooth tab. Then activate the “Add devices” option at the top of the window. From the list (if one appears), all you have to do is select the name of your speakers and make the connection.

By the way, on most models of Bluetooth speakers, when successfully connected to a PC or laptop, the color of the indicator changes or lights up completely different.

It is important to know! Some laptop models do not have built-inBluetooth- adapters. In this case, to connect a wireless speaker, you will need to purchase a special receiver. He's the same Bluetooth Dongle that connects to a regularusb-port.

Possible problems connecting Bluetooth speakers and ways to solve them

What to do if the Bluetooth speakers don’t work or don’t want to connect to the laptop?

In addition, do not forget that the Bluetooth device may not work due to a dead battery. After all, even top models (from manufacturers such as JBL, Logitech, BeoPlay, Libratone, etc.) have an average battery capacity of 6000 mAh. That is, at average volume it lasts for 7-10 hours of battery life.

What is Bluetooth and why is it needed?

Bluetooth (bluetooth - “blue tooth”) is a special standard wireless communication, i.e. using electromagnetic vibrations. It is used to connect two mobile devices and transfer data between them. This technology was originally developed to provide work wireless headset V mobile phones, which allowed for hands-free conversations ( hands free). But this does not limit the use of this technology in a laptop and other mobile gadgets– You can also use it to transfer files.

Everyone has long known about another wireless communication standard – Wi-Fi. What are the differences between the new standard and Wi-Fi? Their main differences are:

Different frequency ranges.
Bluetooth has a shorter range.
When using Bluetooth, there is no need to configure the hardware configuration.
This standard cannot be configured local network, i.e. connect more than two devices at the same time.
The blue tooth has a significantly higher transmission speed.

As a rule, a modern laptop already has a built-in wireless communication radio module. But if you don’t have one (or one of the subscribers is a desktop PC), then you can buy an external adapter. It resembles a flash drive and connects to a USB port.

You can find out whether a laptop with Windows 7 has a built-in radio module, as well as see its status and enable it using the task manager. To do this, go to the control panel, select “Administration”, open “Computer Management”, then select “Device Manager”. If on the list installed devices There is no “Bluetooth radio module” item, which means that the laptop does not have a Bluetooth module. If there is one, but next to it a question or Exclamation point, this means that the adapter drivers require updating or reinstalling, but this is a topic for a separate article. When you purchase an external adapter, it usually comes with a driver CD. After the device driver is installed, Windows 7 will detect it, and the user can verify this by similar actions.

What to do if bluetooth doesn't work?

This condition in a laptop with Windows 7 can occur for three reasons:

The radio adapter is turned off and needs to be turned on.
The adapter is faulty.
Adapter drivers are not installed or need to be reinstalled.

We are only interested in the first case - when the corresponding adapter is turned off and we need to turn it on. This can be done in several ways.

Standard way to turn on Bluetooth

In the notification area of the panel windows tasks 7 there is an icon for this radio module.

To configure the adapter status, you need to click on it, a menu will appear. Next, click on the “Add device” item.

Enabling via hardware

There are laptop models equipped with hardware buttons to turn the adapter on/off. If there is one, then it must be set to the ON position.

Turn on using the Fn key

Most laptops have an Fn key on their keyboard. It is designed to control the status of various equipment installed in the computer, including bluetooth. The top row of keys are function keys (usually F1 - F12), which, when pressed together with Fn, performs such control. In a laptop, depending on its manufacturer, the “blue tooth” state control key may correspond to various function keys, as a rule, these are F3-F5. Such a key must have a corresponding icon.

Sometimes both wireless adapters are made in one module, so they are turned on and off simultaneously using such function key.

Enable via Device Manager

How to enter the Windows Device Manager has already been said at the beginning of the article. Once you enter it, you can see a picture with a list of all installed devices.

We are interested in the item “Bluetooth radio modules”. Open it, select the appropriate adapter and right-click on it. If this module is enabled, then the menu that appears will contain the “Disable” item, otherwise – the “Enable” item. This is what we need - click on it, the adapter turns on.

Enabling the radio module using third-party utilities

Depending on the manufacturer, there are a number of third-party utilities that can be used to enable the radio adapter. These are utilities such as:

Wireless Console ( ASUS laptops).
ReadyComm ( Lenovo laptops).
Utility Center (HP laptops).

They are all very easy to use and easy to find on the Internet. After installing them in Windows 7, a Bluetooth logo icon appears in the notification bar. Right-clicking will bring up a menu containing the item “Enable/Disable Bluetooth Adapter.”

Enabling using the command line

This method of turning on the radio communication module is more difficult than all those described above, so you should only resort to it if none of the methods already given helped. To enable this, you will need the DevCon utility - it can be easily found on the Internet and downloaded. If it is downloaded in an archived state, then the archive must be unpacked. The program must be placed in the C:\windows\system32 directory. In addition to this utility, you will also need the identifier (ID) of the radio module. You can find it out using the dispatcher windows devices 7.

In it, open the “Bluetooth radio modules” item, right-click on the desired module and select “Properties” in the menu that appears. A window will open in which you need to go to the “Details” tab, and select “Hardware ID” in the “Property” drop-down list. In the “Value” window, the first line contains the ID of the selected radio communication module.

Next we enter the mode command line. To do this, click “Start”, enter cmd in the bottom search line, a window opens with the value “cmd” in the top line. Click on it and a command line window will open. In it we enter a line like devcon enable ID (without quotes). Instead of ID, you must specify the hardware ID obtained from the device manager. Press Enter, the DevCon utility starts, which turns on the disabled radio module.

SdelaiComp.ru

Connecting speakers to a laptop

Recently, modern residents have increasingly begun to purchase laptops that are characterized by mobility and compactness. However, when there is a need to listen to audio recordings or watch videos, problems with sound may arise in the operation of the device, or rather, the power of the built-in speakers is simply not enough to ensure comfortable listening.

For this reason, sooner or later, laptop users want to know how to connect speakers to a laptop.

To listen to music comfortably, just add a couple of external speakers

Types of external speakers

Having received an affirmative answer to the question: “Is it possible to connect speakers to a laptop?”, the user “burdens” himself new problem related to choosing the most suitable external speakers.

Selecting external speakers

Specialized stores can offer a wide selection of speakers that differ in design, quality and power. When making a choice, the user must understand how to connect the speakers to the laptop, especially since the connection methods can be different, as well as the power supply to the speakers.

External speakers fall into two categories:

portable
stationary.

Portables, just like a laptop, are characterized by compactness and mobility. They are easy enough to take with you on the road and simply connect. Fixed speakers are large in size, but they are the most suitable option for those who want to provide the highest quality sound.

Most often, stationary external speakers, which are equally suitable for both laptops and desktop computers, require power supply from the network. Portable speakers receive power from the USB connector. There is also a category of speakers that receive power from built-in batteries.

Having decided on the choice of portable speakers, the owner of a netbook should carefully study the recommendations of experienced users and find out how to connect the speakers to the laptop.

Connecting speakers

The connection process is simple, but may vary depending on the type of external speakers purchased. Contact can be achieved by connecting speakers to various connectors, including a headphone jack, a USB connector and Bluetooth.

Connection via headphone jack and USB port

On the laptop body there are, most often on the side, special connectors that provide contact with a microphone and headphones. If you need to connect portable speakers, you can insert their plug into the headphone jack. By the way, you can insert the plug even when the laptop is turned on, just trying to avoid contact with these connectors.

After the completed manipulations, the user is convinced in practice that it is enough to simply connect the speakers to the laptop and this does not require any additional super-complex skills.

If the laptop owner wants to connect to the laptop music column, which is accompanied by a USB interface, then problems will also not arise, since modern computer technology equipped operating system, which allows you to automatically detect devices, as well as download and install drivers if necessary. If the store also provided drivers when purchasing external speakers, then the user can make solving the “problem” easier by independently installing necessary drivers.

Connecting via Bluetooth

The modern computer industry never ceases to amaze consumers, constantly offering them modernized devices that make it easier to perform many tasks. In particular, a laptop user can purchase speakers that connect via Bluetooth from a specialized store. In this case, the need for wires, which often get in the way, creating mini-obstacles, is completely eliminated.

If the laptop owner managed to purchase just such external speakers, then it is important to learn how to connect a Bluetooth speaker to the laptop. Experienced users claim that there are no special problems with this connection either, there are only minor peculiarities.

Initially, you should enable Bluetooth directly on the laptop, and then start searching for devices. Carrying out such a search, the laptop will demonstrate all devices that have Bluetooth activated, including purchased external speakers.

Having found the required speakers in the list of listed devices, click on their icon and agree to the connection. This completes the steps, and the user can enjoy the operation of the installed speakers connected via Bluetooth.

Checking speaker connections

As you can already see, external speakers are connected to a laptop different ways, without being accompanied by any special problems. Experts recommend checking the quality of the speaker connections immediately after connecting.

If there is no sound, then you should check the sound settings in Windows, and also turn the volume control on the external speakers themselves. By the way, experts recommend never setting the volume level on a laptop to 100%, as this causes a large load on the audio channel. By increasing the load, you can provoke the failure of components, which is subsequently accompanied by financial losses. In this regard, if you want to listen to loud music, it is best to increase the volume directly on the speakers themselves.

If there is still no sound, you should check the speaker power button, connectors and quality of connection via Bluetooth. The lack of sound can also be caused by a driver that either did not install or did not install correctly and therefore needs to be reinstalled.

So, the process of connecting external speakers to a laptop is not accompanied by difficulties. Having studied all the instructions in advance, it can only take a few minutes, after which the laptop owner will be able to enjoy the amazing sound of audio files.

NastroyVse.ru

How to enable Bluetooth on Windows 7

Despite the fact that every modern smartphone, tablet, laptop, etc. is equipped with a WiFi adapter, it is still easier to communicate via Bluetooth. And if we need to transfer a small file or connect a wireless headset, then Bluetooth is a more convenient solution. How to enable bluetooth on Windows 7?

It is worth noting that before moving on to answering the main question of how to turn on the Bluetooth adapter on a laptop with Windows 7, you should prepare the radio module for operation.

Preparing equipment for operation

The preparation process includes:

Installing drivers.
Installation of additional utilities.

The fact is that without the presence of suitable drivers, Bluetooth will not work in the operating room windows system 7. Where can I get them? Each laptop comes with a software disc. If there is no such disk, then the necessary software can be found on the official website of the laptop manufacturer.

If you are using an external Bluetooth adapter, then to find a suitable one software you need to know its full name, which is indicated on the packaging.

After installing the driver, your Windows 7 computer will detect new hardware, which you can see in Device Manager. You can open the service as follows. Press the Start+R keys simultaneously. In the dialog box that opens, write mmc devmgmt.msc and press Enter. Here we are interested in two branches:

network hardware.
Bluetooth radio module.

We open them and see the full name of the adapter that is installed on the computer.

Additional utilities are required to work with the adapter. They allow you to connect to devices wirelessly. So, the preparation is complete, and you can move on to the question of how to enable Bluetooth on a computer running Windows 7.

How to easily enable Bluetooth in Windows 7: Video

Where to find bluetooth on windows 7

How to find bluetooth on a computer running Windows 7? Everything is very simple. As mentioned above, it shows up in Device Manager. You can also turn it off there. This is one of the ways to activate the module.

Another way to turn on wireless is to press a special key on your laptop.

On different models This key can be located in different places. As a rule, it is combined with the inclusion of a WiFi module. The button has a corresponding designation. If it is combined with a key, for example, F2, F5, F10 or some other, then before pressing it you should press and hold the “Fn” button.

It is worth noting that after installing the drivers, the icon wireless adapter will appear in the system tray (the area in the lower right corner of the desktop). If you right-click on it, a control menu will appear in which you can disable or enable radio communication.

Now you know how to turn on Bluetooth in the operating room Windows system 7. But how to connect devices to it?

How to set up Bluetooth on Windows 7: Video

How to connect a device via bluetooth

How to connect a Windows 7 computer to other devices via Bluetooth? To do this, right-click on the corresponding icon in the system tray. In the menu that appears, select “Add devices”.

Articles on the topic

It is worth noting that if you want to connect to a laptop from a tablet or smartphone via Bluetooth, then you need to enable discovery. To do this, click on the corresponding icon in the Windows 7 tray again and select “Open settings”. Here, in the “Settings” tab, check the “Allow devices to detect this computer” checkbox.

Finding available Bluetooth equipment to connect to: Video

How to easily enable Bluetooth in Windows 7

How to easily enable and configure Bluetooth on a laptop

How to set up Bluetooth on a Windows 7 laptop

How to turn on Bluetooth on Acer laptop

bezprovodoff.com

How to connect a Bluetooth headset to a computer

How to connect a Bluetooth headset to a computer is a fairly common question these days. After all, almost every laptop is equipped with a wireless communication module. At the same time, people often call their loved ones, relatives, colleagues, and so on via Skype or other programs.

Agree, it is much more convenient to use a wireless headset that will allow you to talk with a person, while you can freely move around the apartment or house and hear your interlocutor perfectly. Very often, these headphones are used by fans of online games. And just to watch movies or listen to music, you don’t need to sit at a computer, but you can move freely without restrictions.

But, since such equipment was primarily created for phones, the question arises: is it possible to connect a Bluetooth headset to a computer? The answer is simple - it is possible, provided that a Bluetooth module is installed on the computer. Read about how to check for a built-in Bluetooth adapter here.

How to connect Bluetooth headphones to a computer: Video

Preparing your computer to connect a wireless headset

First of all, it is worth noting that the vast majority of laptops are equipped with wireless adapters. But the same cannot be said about desktop computers. Therefore, if you have a regular PC, then first you will have to buy and install a Bluetooth adapter. Read about how to choose the right Bluetooth adapter here.

Connecting wireless headphones to PC

It’s worth noting right away that the headphones come with instructions that describe in detail the process of connecting the device. If for some reason you do not have such instructions, then follow these steps. And if you are just going to buy a Bluetooth headset, then be sure to read this article.

Often when connecting a computer and various peripherals with using Bluetooth Users are having problems. Installed and turned on devices completely refuse to detect each other or communicate. A few simple recommendations for installing, connecting the adapter and adding devices that support Bluetooth will help you resolve these problems.

Bluetooth needs to be turned on and made discoverable

First of all, make sure that the devices you want to pair are indeed equipped with Bluetooth. This is clearly indicated in the documentation, and laptops have an additional designation on one of the stickers on the bottom cover - Bluetooth. Some budget models laptops, despite having all the signs of communication capabilities, do not have installed module. However, even if the module is there, it is initially disabled and the computer or phone simply does not see it.

Especially many ways turn on bluetooth on laptops. This could be a switch on one of the sides of the case, a button with a Bluetooth icon, or a keyboard shortcut. Often the button or switch is indicated by an antenna icon, and it also turns on Wi-Fi.

There may not be any enable elements at all, but there is an icon in the tray on which you need to call up the menu, right-click and select the enable option. It is impossible to list all the options, the main thing is to find this control element and set it to position - ON. When the module is turned on, the Bluetooth icon will appear in the tray or it will change color and become active.

On mobile phones Bluetooth connection it must not only be activated, but also made visible to others. Control Bluetooth settings can usually be found in the section Applications phone main menu.

Once turned on, the Bluetooth symbol will also appear on the display. Activation must be completed Search for devices, which will show who you can connect with. If desired device not detected, check whether the adapter is installed correctly on the computer.

Bluetooth adapter must be installed and discoverable

A Bluetooth adapter is used to connect devices to desktop computers. It connects to a USB port. Usually the device comes with a software disc, but if it is not there, Windows 7 will install its own drivers when connected.

As a result, four devices will be identified − Generic Bluetooth Radio And Microsoft Bluetooth Enumerator, as well as two Bluetooth network devices. In some cases, another device is detected - Bluetooth peripheral, which remains unidentified.

The solution to this problem is described in the articleSetting up Bluetooth in Windows 7.

Now you need to make the computer itself visible for detection. To do this, open the Bluetooth icon menu in the tray and select Open options. On the bookmark Options, default, computer visibility is disabled- this does not allow connect bluetooth on your phone or laptop. Enable this option and check the others, then apply the settings.

Repeat Search for devices on the phone, now the computer is in the list, you can start setting up the connection.

To communicate, the device must be added

To create a pair for Bluetooth connections Let's use the icon menu item - Add device. The computer will find all objects available for communication, select the one you need and click Further. For security, when connecting, you are asked for a code that must be entered on your phone or laptop. Code entry time is limited.

For devices without a keyboard, such as a mouse or headphones, after the second attempt you will be offered connection options, select the one you need. As a result, the menu item Show Bluetooth devices will provide a choice for managing the required object.

Recently, modern residents have increasingly begun to purchase laptops that are characterized by mobility and compactness. However, when the need arises to listen to audio recordings or watch videos, the device may experience problems with sound, or rather, the power of the built-in speakers is simply not enough to ensure comfortable listening.

For this reason, sooner or later, laptop users want to know how to connect speakers to a laptop.

To listen to music comfortably, just add a couple of external speakers

Having received an affirmative answer to the question: “Is it possible to connect speakers to a laptop?”, the user “burdens” himself with a new problem associated with choosing the most suitable external speakers.

Selecting external speakers

External speakers fall into two categories:

portable
stationary.

Portables, just like a laptop, are characterized by compactness and mobility. They are easy enough to take with you on the road and simply connect. Stationary speakers are large in size, but they are the most suitable option for those who want to provide the highest quality sound.

Most often, stationary external speakers, which are equally suitable for both laptops and desktop computers, require power from the mains. Portable speakers are powered by a USB connector. There is also a category of speakers that receive power from built-in batteries.

Having decided on the choice of portable speakers, the owner of a netbook should carefully study the recommendations of experienced users and find out how to connect the speakers to the laptop.

Connecting speakers

Connection via headphone jack and USB port

After the manipulations have been done, the user is convinced in practice that it is enough to simply connect the speakers to the laptop and this does not require any additional super-complex skills.

If the owner of a laptop wants to connect a music speaker to the laptop, which is accompanied by a USB interface, then problems will also not arise, since modern computer equipment is equipped with an operating system that allows you to automatically detect devices, as well as download and install drivers if necessary. If the store also provided drivers when purchasing external speakers, then the user can make solving the “problem” easier by installing the necessary drivers himself.

Connecting via Bluetooth

Checking speaker connections

As you can already see, external speakers are connected to a laptop in various ways, without any particular problems. Experts recommend checking the quality of the speaker connections immediately after connecting.

If there is no sound, you should check the sound settings in Windows, and also turn the volume control on the external speakers themselves. By the way, experts recommend never setting the volume level on a laptop to 100%, as this causes a large load on the audio channel. By increasing the load, you can provoke the failure of components, which is subsequently accompanied by financial losses. In this regard, if you want to listen to loud music, it is best to increase the volume directly on the speakers themselves.

If there is still no sound, then you should check the speaker power button, connectors and quality of connection via Bluetooth. The lack of sound can also be caused by a driver that either did not install or did not install correctly and therefore needs to be reinstalled.